Injection mortar ResiFIX EYSF

ResiFIX - For everyone the appropriate system

Product image of cartridge ResiFIX EY 300 SF

Product overview

The injection mortar ResiFIX EYSF is ETA- approved for non-cracked concrete (Option 7) and masonry and guarantees very high loads due to its high chemical resistance. That way it is perfectly suitable for heavy-duty applications and enables an installation free of expansion forces of e.g. anchor rods, anchor studs, square pipes, etc. also in many other base materials like hollow bricks, solid bricks and concrete.

The injection mortar ResiFIX EYSF is ETA- approved for non-cracked concrete (Option 7) and masonry and guarantees very high loads due to its high chemical resistance. That way it is perfectly suitable for heavy-duty applications and enables an installation free of expansion forces of e.g. anchor rods, anchor studs, square pipes, etc. also in many other base materials like hollow bricks, solid bricks and concrete.

ResiFIX is harmless for your health as confirmed by emission class A+ for critical emission in closed areas- it can even be used in wet or water filled drill holes. Additionally it obtains the LEED sustainability certificate for environmentally friendly, low-pollutant low-emission and sustainable building.

After curing ResiFIX resists a temperature range of -40°C up to +80°C.

Show more

Download documents

View videos

List of references

Filters

Content [ml]

Reference

d

J

300EYSF

410EYSF

300EXSF

Content [ml]

d

J

280

410

280

Material

d

J

Epoxyacrylate

Epoxyacrylate

Epoxyacrylate

Packaging units

d

J

1

1

1

Packaging type.

d

J

Cartridge

Cartridge

Cartridge

A

t

3 / 3 references

Applications

Steel constructions
Consoles
Machines
Guard rails
Canopies
Distance mountings
Doors
Wood constructions
Facade substructures

Base materials

eta

Suitable materials with approvals

Concrete

Concrete

Solid brick

Solid brick

Solid sand-lime brick

Solid sand-lime brick

Lightweight solid concrete block

Lightweight solid concrete block

Hollow brick

Hollow brick

Hollow sand-lime block

Hollow sand-lime block

Lightweight hollow concrete block

Lightweight hollow concrete block

Other suitable materials

Natural stone

Natural stone

How to install

Mounting in concrete and solid brick

Drilling concrete

Dusting with blow out pump

Remove dust with a cleaning brush

Discard the first 10 cm.

Inject the appropriate amount of injection mortar (min. 2/3 of the drill hole)

Push in the anchor rod while turning

Respect the curing time of the injection system

Attachment can be mounted

Mounting in hollow brick

Create borehole

Clean the drill hole (4x blowing out, 4x brushing)

Clean the drill hole (4x blowing out, 4x brushing)

Insert a plastic sleeve

Discard the first 10 cm.

Inject the appropriate amount of mortar (fill the sleeve completely)

Push in the anchor rod while turning

Respect the curing time of the injection system

Attachment can be mounted

Do you have any questions about this product?

Request more info