Blister Injection mortar ResiFIX PYSF

PYSF - the solid solution for everyone
Product image of blister ResiFIX PY 165 SF
Product image of ResiFIX PY 165 SF cartridge with two mixing nozzles
Product overview

The injection mortar ResiFIX PYSF is your ETA- approved solution for heavy-duty applications in non-cracked concrete (Option 7) and masonry (M8-M16) and many other base materials like aerated concrete, lightweight solid or hollow concrete blocks or sand lime bricks. Due to its high chemical resistance ResiFIX PYSF guarantees high loads and an installation free of expansion forces of e.g. anchor rods, anchor studs, square pipes, etc.

Show more
Download documents
View videos
List of references
Reference
d
J
165PSF
Content [ml]
d
J
165
Material
d
J
Polyester
Packaging units
d
J
1
Packaging type.
d
J
Cartridge
A
t
1 / 1 references
Applications
  • Steel constructions
  • Consoles
  • Machines
  • Guard rails
  • Canopies
  • Distance mountings
  • Doors
  • Wood constructions
  • Facade substructures
Base materials
eta
Suitable materials with approvals
Concrete
Concrete
Solid brick
Solid brick
Solid sand-lime brick
Solid sand-lime brick
Lightweight solid concrete block
Lightweight solid concrete block
Hollow brick
Hollow brick
Hollow sand-lime block
Hollow sand-lime block
Lightweight hollow concrete block
Lightweight hollow concrete block
Aerated concrete
Aerated concrete
Other suitable materials
Natural stone
Natural stone
Other related products
How to install

Mounting in concrete and solid brick

Drilling concrete
Dusting with blow out pump
Remove dust with a cleaning brush
Discard the first 10 cm.
Inject the appropriate amount of injection mortar (min. 2/3 of the drill hole)
Push in the anchor rod while turning
Respect the curing time of the injection system
Attachment can be mounted

Mounting in hollow brick

Create borehole
Clean the drill hole (4x blowing out, 4x brushing)
Clean the drill hole (4x blowing out, 4x brushing)
Insert a plastic sleeve
Discard the first 10 cm.
Inject the appropriate amount of mortar (fill the sleeve completely)
Push in the anchor rod while turning
Respect the curing time of the injection system
Attachment can be mounted
Useful tips

Do you have any questions about this product?

Request more info