Insulation screw IPS 80

Special screw for direct fastening into insulation materials (ETICS)

Product image of insulation screw IPS all colours

Product image of insulation screw IPS 80 anthracite grey

Product image of insulation screw IPS 80 copper brown

Product image of insulation screw IPS 80 chocolate brown

Product image of insulation screw IPS 80 sepia brown

Product image of insulation screw IPS 80 signal white

Product image of insulation screw IPS 80 telegrey

Product image of insulation screw IPS 80 traffic black

Product overview

Save time versus traditional fastening on insulated boards! Install up to 5 fixings with the time it would take to install only 1 using other fastening solutions.

The insulation screw IPS is perfectly suitable for direct fastening into insulation materials without thermal bridges of wall connection profiles, metal sheets, base protection profiles, cornice covers, motion detectors, lamps, signs, ... making the IPS the reference fixing for thermal insulation in light duty applicartions and light loads, that must be secured directly into the insulation.

The pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested in accordance to DIN EN 1027 by the "Prüfzentrum für Bauelemente" (testing center for building elements) Pfb in Rosenheim, Germany. The sealing ring prevents water and cold from penetrating the façade and seals it permanently. No subsequent sealing is necessary, which saves you an installation step. The drill hole is automatically sealed rainproof and the energy efficiency of the insulated façade is maintained.

The innovative IPS is a screw made out of glass fiber-reinforced nylon, that means: aging, weather and UV-resistant. Its stylish flat head with EPDM sealing ensures optimal sealing and surface blending.

Built with the TX-Drive (TX25) to get a fast and easy installation.

The head hole allows light duty fixings in combination with a screw 3,5 mm. A distinctive thread ensures good hold in insulation boards, furthermore the IPS fits through a 8mm hole. No pre-drilling in plaster (up to 7 mm) due to sharp drilling rip, therefore you get an extremely fast mounting.

Conceived with a length of 80mm the IPS is suitable for nearly all insulated facades (from 80mm) such as external thermal insulation composite systems (ETICS), styrofoam boards, hard foam boards, polystyrene boards or wood firbre boards.

Find it available in different colours to match with the most common materials and finishing.

Made in Germany. Halogene free.

Download documents