Hammer-on flange beam clip CAL

For hanging wires, S-hooks or chains

Product overview

The CAL clip is a CNBOP fire approved flange beam clip for hanging wires, S-hooks or chains on beams with flanges of thicknesses between 1.5 and 20 mm. Save time with the fast and stable fixing to metal beams: the CAL beam clip is installed simply by hammering it onto the flange, avoiding drilling or welding.

Its 6.3 mm hole enables the insertion of the common wires, chains, S hooks, cable ties, bolts ... for installations on beams.

Benefit from up to 90kg of safe working load.

Available in two coatings:

zinc aluminum grey flakes for high resistance to corrosion (480Hr. SST)
black coating for indoors

The zinc flake coating makes the beam clip suitable for indoor as well as outdoor, humid and corrosive environments and resistant to corrosion in salt water mist for up to 480 hours (DIN 50021).

The CAL hammer-on flange beam clip is part of our comprehensive range of beam fixings for the suspension of cable ties and clamps together with the CBR and CAB clips, that are all installed by just hammering them onto the flange.

Furthermore our complete assortment covers beam fixings for the suspension of threaded rods from flanges - with the setscrew beam clamp PMV and multifunctional beam clip CMV being the most popular solutions. These products feature a pre-assembled setscrew, that is simply tightened to securely fasten the product.

Find all our beam fixings here.