How to save time with distance mounting

How to save time with distance mounting

How to connect the external insulation without a thermal bridge

ResiTHERM® compared to other systems

Product image of the ResiTHERM® 16

Distance mounting system ResiTHERM®

4.6/5

AT A GLANCE

ResiTHERM® 16 and ResiTHERM® 12 are the first ETA-approved and driving rain-tight heavy-duty mounting systems for insulated facades!

  • Universally applicable for almost all types of insulation and substrates
  • Heavy loads such as awnings, sun sails, satellite dishes, French balconies and much more. attach quickly and securely
  • The ideal solution in steel and metal construction or building construction, in the HVAC sector, for plumbers, roofers, electricians, facade builders, window builders and awning builders
  • Premium product (Designed and Made in Germany)
  • ResiTHERM® 16 honoured with the German Design Award 2023 for excellent product design
View ResiTHERM® 16

Distance mounting - Save time with these 4 points

1. Pre-assembled

The correct coordination of the product components is of crucial importance for safety-relevant attachments such as canopies or sun sails! Therefore, ResiTHERM® 16 is pre-assembled. This ensures that the product is set up correctly and you do not lose any time assembling it.

vorher: Befestigungsprodukt nicht vormontiert
Before
Graphic showing how you can save time installing with the ResiTHERM®16 compared to traditional methods
After with ResiTHERM® 16 and 12

2. Self-cutting

Due to its thermal separation module with a special thread, ResiTHERM® automatically screws itself through the plaster. No additional assembly tool is required to create the drill hole in the insulation. This saves you an assembly step and ensures anchoring free of thermal bridges. Here you will find an explanation of all components of the ResiTHERM® 16.

vorher: langwierige Montage, zusätzliche Werkzeuge erforderlich
Before
No extra tools needed when installing with the ResiTHERM®16 which means you save time
After with ResiTHERM® 16 and 12

3. Integrated sealing washer

Thanks to the integrated, aging and weather-resistant sealing washer, no additional sealing of the drill hole is required with the ResiTHERM® 16 spacer installation system, because the seal lies directly on the plaster. You save an assembly step and thus assembly time and expenses for additional material such as sealing compound.

Vorher: Montage mit Siebhülse und Ankerstange, langwierig, da das Bohrloch zusätzlich mit abgedichtet werden muss
Before
Save time with the ResiTHERM®16 without additional sealing of the drill hole
After with ResiTHERM® 16 and 12

4. Proper installation guaranteed

Due to the user-friendly design, almost nothing can go wrong during assembly.

With ResiTHERM® 16 there is no risk of setting the heavy-duty anchorage too deep in the drill hole. Leaks or mold formation were to be feared with conventional solutions due to slippage or installation too deep in the drill hole. With ResiTHERM® 16, on the other hand, the head with the integrated sealing disk rests on the plaster and prevents it from slipping into the drill hole.

You automatically get an energy-efficient and driving rain-proof finish and save yourself the task of measuring the setting depth.

Screw in - done!

Before
No risk of setting the ResiTHERM®16 too deep in the drill hole with its integrated sealing disk
After with ResiTHERM® 16 and 12
View ResiTHERM® 16

Installation videos

ResiTHERM® 16 and 12 are both suitable for solid building materials such as concrete, brick or aerated concrete, as well as for perforated building materials such as brick with chambers. Find a list of all suitable base materials on the product page.

ResiTHERM® 16 in concrete installations

ResiTHERM® 12 in perforated brick installations

Suitable base materials

Downloads and technical assistance

Manufacturer leaflet ResiTHERM®: Advantages and components of the distance mounting system
Manufacturer leaflet ResiTHERM®
Manufacturer leaflet ResiTHERM®: Assortment and content of the kits
Manufacturer leaflet ResiTHERM®
Manufacturer leaflet ResiTHERM®: Load values and technical data
Manufacturer leaflet ResiTHERM®

EXPLANATORY LEAFLET

The 30-page manufacturer leaflet from CELO explains the advantages and differences between the ResiTHERM® mounting systems (variant 16, 12 and 37) for the thermal bridge-free installation of awning brackets and more on the insulated façade.

• Installation instructions
• Suitable building materials
• Range (galvanised and stainless steel assortment)
• Contents of the sets
• Accessories
• Load values

Download leaflet

Do you have any questions about thermally separated fastenings in and through ETICS (external thermal insulation composite systems) or would you like personalised technical advice? Tell us about your application and our technical assistance service will respond to you as quickly as possible:

Technical assistance request

Please complete the form below

Our team are here to assist at any time. Just fill in the form below and we will get back to you as soon as possible. 

Email is empty or invalid You are using a generic email. If possible, please use a business one. Please click next to continue.
Your account is not activated yet. Please contact us. There is an error with your account. Please contact us. You have reached the monthly limit of downnloads . Please contact us.
Message is empty or invalid
Attachment
Max file size to upload is 5 MB Bad file extension. Please upload files matching the following extensions: .doc, .docx, .pdf, .png, .jpeg, .jpg, .PNG, .JPG, .PDF File is empty or invalid
Country is empty or invalid
First name is empty or invalid
Last name is empty or invalid
Company is empty or invalid
Profile is empty or invalid
Phone type is empty or invalid
Phone number is empty or invalid
Please accept the privacy policy
There was an error while saving your request

Further information

Everything you need to know about the ResiTHERM® 16 innovation

What advantage does ResiTHERM® 16 offer you for heavy-duty fastening on insulated façades? With clear installation videos and an overview of the sets and accessories!

Learn more

Not sure which ResiTHERM® type is suitable?

Find out in the product comparison (ResiTHERM® 16, 12 and 37) how to select the right product and which ResiTHERM® system is suitable for which substrate:

Comparison page

The easy insulation fixings selector

How do I find the right solution for your mounting on the insulated façade? Fixing light, canopy or balcony? To wood fibre board or polystyrene? Step-by-step guide to the right product, including load values.

Start selector

Why should you avoid thermal bridges?

Find out here why avoiding a thermal bridge is important and how you can save heating costs and maintain the energy efficiency of your building with the right fastening solutions.

Learn more

The playlist: This is how quickly and easily you can install the thermal plugs and screws from CELO

The insulation plugs and screws from CELO are not only thermal bridge-free and UV-resistant, but can also be installed in next to no time. In short videos, we show you how to install them:

View mounting videos

All insulation fixings at a glance

CELO offers time-saving solutions that also ensure thermal separation. Take a look at the special solutions for the installation of French balconies, satellite dishes or wall connection profiles.

To the overview