Insulation fixings
Metal anchors
Plugs and fixings
Direct fastening
Nailers and accessories
Chemical anchors
Clamps and clips
Profiles and accessories
Screws
Fixings accessories
ResiTHERM® 16 + 12 for heavy-duty fixings on the insulated façade
ResiTHERM® 16 + 12 for heavy-duty fixings on the insulated façade
Contents
ResiTHERM® 16 & 12 make the difference
The only distance mounting system with an ETA for concrete and impervious to driving rain.
Quicker to install with fewer installation steps than any other systems on the market.
Reliable, durable fastening with ETA (European Technical Assessment / Approval)
Effective thermal separation prevents cold bridges
Impervious to driving rain up to wind force 11 Beaufort (violent storm)
Significant time and cost savings due to simple and quick installation
High-quality materials such as A4 stainless steel
Made in Germany
(Aichach, Bavaria)
Reliable, durable fastening with ETA (European Technical Assessment /Approval)
Effective thermal separation prevents cold bridges
Impervious to driving rain up to wind force 11 Beaufort (violent storm)
Significant time and cost savings due to simple and quick installation
High-quality materials such as A4 stainless steel
Made in Germany
(Aichach, Bavaria)
What is a distance mounting system?
The assembly of heavy loads such as French balconies, canopies, or air conditioning units on an ETICS (External Thermal Insulation Composite System) insulated façade is a challenge because the insulation alone does not provide enough support for heavy load installation.
Distance mounting, spacer mounting or stand-off installation means that the fastening solution bridges a distance that does not offer enough support for the installation (in this case the thermal insulation) - by means of an anchor rod. It anchors itself securely in the underlying wall, offering reliable support for fixing on the exterior façade.
One fastening solution, many advantages
Suitable for all common building materials:
such as concrete, aerated concrete, masonry (solid and perforated brick)
Thermal separation module:
The thermal separation module prevents heat bridges and features a special thread. This specially developed thread, screws itself into the insulation material - you save time as no additional tools are required.
Honoured with the German Design Award 2023 for excellent product design:
No thermal bridges:
Effective thermal separation prevents heat bridges and protects against mould and heat loss
High application flexibility:
One set for all insulation types and thicknesses from 60-300 mm in concrete and 60-250 mm in perforated bricks (ResiTHERM® 16), and from 60-220 mm in concrete and 60-160 mm in perforated bricks (ResiTHERM® 12).
Driving rain and windproof fastening:
Pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested according to DIN EN 1027, no subsequent work necessary such as sealing the fastening point
High-quality materials:
No risk of corrosion due to high-quality materials such as stainless steel A4 and the glass-fibre reinforced separation module
Readjustable anchor rods:
The screw-in depth of the M12 as well as the M16 threaded rod can be amended
Suitable for all common building materials:
such as concrete, aerated concrete, masonry (solid and perforated brick)
Thermal separation module:
The thermal separation module prevents heat bridges and features a special thread. This specially developed thread screws itself into the insulation material - you save time as no additional tools are required.
Honoured with the German Design Award 2023 for excellent product design:
No thermal bridges:
Effective thermal separation prevents heat bridges and protects against mould and heat loss
High application flexibility:
One set for all insulation types and thicknesses from 60-300 mm in concrete and 60-250 mm in perforated bricks (ResiTHERM® 16), and from 60-220 mm in concrete and 60-160 mm in perforated bricks (ResiTHERM® 12).
Driving rain and windproof fastening:
Pre-assembled and weather resistant EPDM sealing ensures clean sealing against driving rain up to wind force 11 (violent storm), tested according to DIN EN 1027, no subsequent work necessary such as sealing the fastening point
High-quality materials:
No risk of corrosion due to high-quality materials such as stainless steel A4 and the glass-fibre reinforced separation module
Readjustable anchor rods:
The screw-in depth of the M12 as well as the M16 threaded rod can be amended
Fast mounting with ResiTHERM® 16 & 12
Video ResiTHERM® 16 mounting in concrete
Video ResiTHERM® 16 mounting in hollow brick
This is how quick and easy the installation of the ResiTHERM® 16 & 12 distance mounting system works:
1. Drill a hole - Drill hole depth varies depending on insulation thickness and substrate
2. Cut the ResiTHERM® 16 or ResiTHERM® 12 to length
3. Fill the drill hole with injection mortar (For perforated brick: use a sieve sleeve)
4. Screw in the ResiTHERM® 16 or 12 until the seal is pressed against the plaster, the thermal separation module drills itself into the insulation
5. DONE!
Let the injection mortar cure and mount the fixture
Please refer to the assembly instructions for all details:
Video ResiTHERM® 16 mounting in concrete
Video ResiTHERM® 16 mounting in hollow brick
This is how quick and easy the installation of the ResiTHERM® 16 & 12 distance mounting system works:
1. Drill a hole, drill hole depth varies depending on insulation thickness and substrate
2. Cut the ResiTHERM® 16 or 12 to length
3. Fill the drill hole with injection mortar (For perforated brick: use sieve sleeve)
4. Screw in the ResiTHERM® 16 or 12 until the seal is pressed against the plaster, the thermal separation module drills itself into the insulation
5. DONE!
Let the injection mortar cure and mount the fixture
Please refer to the assembly instructions for all details:
Better to be safe than sorry - ResiTHERM® 16 & 12
If heavy loads such as canopies, awnings, French balconies, sun sails or air-conditioning units are to be fixed to the external insulation, fixing in the insulation material alone is not sufficient.
The challenge is to bridge the insulation material without causing a thermal bridge and to create a secure anchorage in the wall, e.g. in concrete or perforated brick. ResiTHERM® 16 and ResiTHERM® 12 meet and exceed both of these requirements, as the innovative products are also quick and easy to install and, unlike conventional products, have an ETA (European Technical Assessment).
Typical applications of ResiTHERM® 16
As the applications mentioned are safety-relevant applications, the failure of which can pose a danger to people, ResiTHERM® 16 & 12 have undergone comprehensive testing according to the current state of the art. They are the only products of their kind on the market that have an ETA. Fastening technology products with an ETA are not only recognised in all member states of the EU, but also beyond, often worldwide. Find out why you should use ETA approved products.
In our practical insulation fixings guide, you can find out which products we recommend for other applications such as lamps, letterboxes, cornice covers, wall connection profiles on carports, rainwater downpipes and much more. We explain which product is best suited depending on the insulation and load values:
As the applications mentioned are safety-relevant applications, the failure of which can pose a danger to people, ResiTHERM® 16 & 12 have undergone comprehensive testing according to the current state of the art. They are the only products of their kind on the market that have an ETA. Fastening technology products with an ETA are not only recognised in all member states of the EU, but also beyond, often worldwide. Find out why you should use ETA approved products.
In our practical insulation fixings guide, you can find out which products we recommend for other applications such as lamps, letterboxes, cornice covers, wall connection profiles on carports, rainwater downpipes and much more. We explain which product is best suited depending on the insulation and load values:
ResiTHERM® 16 & ResiTHERM® 12- content of sets & variants
Like ResiTHERM® 16, ResiTHERM® 12 is ETA-approved, driving rain-proof according to DIN EN 1027 and quick to install. The two innovative products differ in the diameter of the threaded rod lying in the wall - M12 for ResiTHERM® 12 as opposed to the larger M16 threaded rod for ResiTHERM® 16.
Contact us to find out more or to pre-order the product
Content
ResiTHERM® 16 and ResiTHERM® 12 are available in two easy-to-use sets of 2 or in a bulk pack of 20.
A ResiTHERM® 16 set of 2 contains:
- 2x ResiTHERM® 16, thermal separation module M16 / M12
instead for ResiTHERM® 12:
2x ResiTHERM® 12, thermal separation module M12 / M12 - 2x Threaded rod M16, DIN 976, zinc plated, steel quality 8.8
instead for ResiTHERM® 12:
2x Threaded rod M12, DIN 976, zinc plated, steel quality 8.8 - 2x Threaded stud M12x70, DIN 913, stainless steel A4
- 2x Hexagon nut M12, DIN 934, stainless steel A4
- 2x Washer M12, DIN 125, stainless steel A4
- 1x Hexagon socket bit, 1/4 Inch, size 6
- 1x Mixing nozzle extension 245 mm
- 2x Plastic sleeve SH 20x130 mm
- 1x Instruction manual
For secure installation injection mortar ResiFIX is neccessary (see following section accessories)
ResiTHERM® 16 & 12 are available in two variants:
zinc plated or stainless steel
While the external metal parts are always made of A4 stainless steel, the threaded rod located in the insulation and wall differs for the two variants. It is available in zinc plated or A4 stainless steel.
Content
ResiTHERM® 16 and ResiTHERM® 12 are available in two easy-to-use sets of 2 or in a bulk pack of 20.
A ResiTHERM® 16 set of 2 contains:
- 2x ResiTHERM® 16, thermal separation module M16 / M12
instead for ResiTHERM® 12:
2x ResiTHERM® 12, thermal separation module M12 / M12 - 2x Threaded rod M16, DIN 976, zinc plated, steel quality 8.8
instead for ResiTHERM® 12:
2x Threaded rod M12, DIN 976, zinc plated, steel quality 8.8 - 2x Threaded stud M12x70, DIN 913, stainless steel A4
- 2x Hexagon nut M12, DIN 934, stainless steel A4
- 2x Washer M12, DIN 125, stainless steel A4
- 1x Hexagon socket bit, 1/4 Inch, size 6
- 1x Mixing nozzle extension 245 mm
- 2x Plastic sleeve SH 20x130 mm
- 1x Instruction manual
For secure installation injection mortar ResiFIX is neccessary (see following section accessories)
ResiTHERM® 16 & 12 are available in two variants:
zinc plated or stainless steel
While the external metal parts are always made of A4 stainless steel, the threaded rod located in the insulation and wall differs for the two variants. It is available in zinc plated or A4 stainless steel.
Extensive accessories
Two-hole nut driver, DIN 3116C for adjusting ResiTHERM® 16
Threaded stud adapter M12/M10, stainless steel A4 incl. nut M10 and washer
Injection mortar ResiFIX Vinylester VYSF (styrene free)
Injection mortar ResiFIX Vinylester VY ECO SF (styrene free)
Injection mortar ResiFIX Polyester PYSF (styrene free)
Two-hole nut driver, DIN 3116C for adjusting ResiTHERM® 16
Threaded stud adapter M12/M10, stainless steel A4 incl. nut M10 and washer
Injection mortar ResiFIX Vinylester VYSF (styrene free)
Injection mortar ResiFIX Vinylester VY ECO SF (styrene free)
Avoid thermal bridges and save heating costs?
When heat is lost from the building envelope at specific points, these are known as thermal bridges, cold bridges or heat bridges. These heat losses can occur when, among other things, awnings, letterboxes, house numbers, etc. are retrofitted to the exterior insulation as they interrupt the insulation at the attachment point and allow cold to penetrate.
Cold bridges can have a negative impact on your wallet, your health and even the building substance. Find out why you should avoid thermal bridges - or ensure thermal separation - and how the right fastening solutions can help you save on heating costs and keep the energy efficiency of your building.
CELO is your specialist for insulation fixings
Years of experience in the development, manufacture and distribution of technical fastening solutions
Different fastening solutions for insulated façades, for light and heavy loads
Countries worldwide where we successfully supply our products
Professional employees working to assist you with outstanding products and service
Years of experience in the development, manufacture and distribution of technical fastening solutions
Different fastening solutions for insulated façades, for light and heavy loads
Countries worldwide where we successfully supply our products
Professional employees working to assist you with outstanding products and service
Do you have questions around thermally separated stand-off installations in ETICS (External Insulation Composite Systems)?
Our competent technical consulting team will provide you with comprehensive advice on questions relating to your application.
Contact us by phone or here via our contact form.
